Owners Manual

X
Turn the bulb counterclockwise by pressing
lightly and pull it out of the bulb holder.
X
Press a new bulb into the bulb holder and
screw in clockwise.
X
Position lamp lens ; and tighten
screws : again.
Changing additional bulbs
Perimeter lamp W 5 W (Cab Chassis only)
X
Switch off the lights.
X
Undo screws : and remove the lamp unit.
X
Turn bulb holder ; and remove it.
X
Pull the bulb out of bulb holder ;.
X
Press a new bulb into bulb holder ;.
X
Screw bulb holder ; into the lamp unit.
X
Carefully position the lamp housing and
tighten screws : again.
Entry lamp W 5 W
X
Switch off the lights.
X
Press in the latching spring of lamp
housing : with a suitable implement, e.g.
a screwdriver.
X
Pry off lamp housing :.
X
Disconnect cable connector =.
X
Pull out bulb holder ;.
X
Pull the bulb out of bulb holder ;.
X
Press a new bulb into bulb holder ;.
X
Screw bulb holder ; into lamp unit :.
X
Connect cable connector =.
The connector locking spring must engage.
X
Align and engage lamp housing :.
Front interior light K 18 W
X
Switch off the lights.
X
Press in the latching spring of lamp
housing : with a suitable implement, e.g.
a screwdriver.
X
Pry off lamp housing :.
X
Pull bulb ; out of the bulb holder.
240
Electrical system
Practical advice