Owners Manual

X
Insert new bulb ;.
X
Align and engage lamp housing : on the
right-hand side.
!
Have the interior lights in the overhead
control panel replaced at a qualified
specialist workshop. You could otherwise
damage the overhead control panel.
Rear interior lights K 15 W
Interior light with switch
Interior light without switch
X
Switch off the lights.
X
Press in the latching spring of lamp
housing : with a suitable implement, e.g.
a screwdriver.
X
Pry off lamp housing :.
X
For interior lights without a switch, fold
back protective cover =.
X
Pull bulb ; out of the bulb holder.
X
Insert new bulb ;.
X
For interior lights without a switch, fold
back protective cover =.
X
Align lamp housing : on the left-hand side
and engage.
Rear interior lights W 5 W
X
Switch off the lights.
X
Undo screws : and remove the lamp lens.
X
Push bulb ; into the bulb holder and
remove by turning counterclockwise.
X
Push new bulb ; into the bulb holder and
screw in by turning clockwise.
X
Position the lamp lens and tighten
screws : again.
Fuses and relays
General safety notes
G
WARNING
Only use fuses approved for Sprinter with the
fuse rating specified for the respective
systems. Do not repair or bypass defective
fuses. A fire may otherwise result through
overload. Have the problem assessed and
resolved only at a qualified specialist
workshop, e.g. an authorized Sprinter Dealer.
Electrical system
241
Practical advice
Z