Owners Manual

X
Make sure that the parking brake has been
engaged and that the handbrake lever has
been pushed down to the stop
(Y page 114).
X
Adjust the steering wheel to provide the
necessary space to rotate and adjust the
driver's seat (Y page 72).
G
WARNING
When releasing and rotating the seats, make
sure that you do not trap yourself or others.
Never place your hands under the seat or in
the vicinity of moving parts.
Seat release (example: co-driver's seat)
X
To rotate the seat: push lever : on the
rear of the seat towards the center of the
vehicle and slightly rotate the seat inwards.
The rotation device is released.
X
Release lever :.
X
Rotate the seat inwards to the desired
position.
G
WARNING
When the seat is facing in the opposite
direction to the direction of travel and has
been moved to the rearmost position, you
could knock against the exposed frame and
be injured.
Therefore, always move the seat to a central
position above the seat base when leaving it
unoccupied. Inform others traveling with you
of this risk.
Twin co-driver's seat
X
To fold the seat cushions forwards: lift
the seat cushion out of front
anchorage :.
X
Pull the seat cushion forwards slightly and
out of rear anchorage ;.
X
Fold the rear edge of the seat cushion up.
i
You can stow various articles in the space
under the twin co-driver's seat.
X
To fold the seat cushion back: fold down
the seat cushion by the rear edge.
X
Slide the seat cushion under the seat
backrest into rear anchorage ;.
X
Push down on the seat cushion at the front
until it engages in front anchorage :.
Rear bench seat
Rear bench seat of the Crew Van
Important safety notes
G
WARNING
Always secure the folded-up seat cushion
with the retainer loop. The seat cushion could
otherwise drop down unexpectedly and
thereby cause injury to yourself or others.
G
WARNING
When folding down the seat cushion, make
sure that nobody can become trapped.
68
Seats
Controls