Owners Manual

when the engine is running: the parking
lamps, the low-beam headlamps, the tail
lamps and the license plate lamps.
For safety reasons, it is only possible to
change this setting when the vehicle is
stationary. The factory setting is ON in
countries in which constant headlamp mode
is mandatory.
X
Turn the key to position 2 in the ignition
lock.
X
Press the 4 menu button repeatedly until
the L indicator lamp in the instrument
cluster flashes and the message ON or
OFF appears in the display.
X
Press f or g to switch constant
headlamp mode on/off.
i
USA only:
If you turn the light switch to T or
L, the corresponding light is switched
on. Constant headlamp mode remains
switched on if you turn the light switch to
Ã.
Canada only:
If you turn the light switch to L, the low-
beam headlamps are switched on.
Constant headlamp mode remains
switched on if you turn the light switch to
T or Ã.
On-board computer with steering
wheel buttons
Layout and controls
The on-board computer is activated as soon
as you turn the key to position 1 in the ignition
lock.
G
WARNING
Only use the on-board computer when road
and traffic conditions permit. You would
otherwise be distracted and unable to
concentrate properly on driving, and could
cause an accident.
The on-board computer shows vehicle
information and settings in the display.
Steering wheel with buttons
You can control the display and the settings
in the on-board computer with the buttons on
the steering wheel.
:
Display
On-board computer operation
;
W and X
R
Select submenus
R
Change values
R
Adjust the volume
=
Using the telephone
6
Accepts a call
~
Ends a call
?
Scrolls from one menu to another
V
Forwards
U
Back
A
Scrolls within a menu
&
Forwards
*
Back
Several functions are combined thematically
in the menus.
On-board computer with steering wheel buttons
77
Controls
Z