Owners Manual

X
Press W or X to select a submenu.
The submenu currently selected is
highlighted.
X
Press & to select the function within a
submenu.
X
Change the setting by pressing W or
X.
The changed setting is saved.
You can select the following submenus:
R
Instrument cluster (Y page 83)
-
Units and language settings
-
Status bar settings
R
Clock/Date (Y page 85)
R
Lighting (Y page 86)
-
Activating/deactivating daytime running
lamp mode and surround lighting (locator
lighting)
-
Setting the exterior lighting delayed
switch-off
R
Vehicle (Y page 87)
-
Setting the radio station selection
-
Setting the windshield wiper sensitivity
R
Auxiliary heating(Y page 106)
R
Convenience(Y page 88)
-
Key-dependent settings
Instrument cluster submenu
Selecting the unit for temperature
Using the steering wheel buttons
X
Press the V or U button repeatedly
until the Settings menu appears in the
display.
X
Press & to switch to the submenu
selection.
X
Press W or X button to select the
Inst. cluster submenu.
X
Press & to select the Temperat.
function.
The selection marker is on the current
setting.
X
Press W or X to select the unit for all
messages in the display: °C (degrees
Celsius) or °F (degrees Fahrenheit).
Selecting the unit for the digital
speedometer
Using the steering wheel buttons
X
Press the V or U button repeatedly
until the Settings menu appears in the
display.
X
Press & to switch to the submenu
selection.
X
Press W or X button to select the
Inst. cluster submenu.
X
Press & to select the Dig. speedo.
function.
The selection marker is on the current
setting.
X
Press W or X to select the unit for
the digital speedometer: km/h or mph.
On-board computer with steering wheel buttons
83
Controls
Z