Owners Manual

Using the steering wheel buttons
X
Press the V or U button repeatedly
until the Settings menu appears in the
display.
X
Press & to switch to the submenu
selection.
X
Press W or X to select the Vehicle
submenu.
X
Press & to select the Wipe sensor
function.
The selection marker is on the current
setting.
X
Press W or X to set the sensitivity of
the rain/light sensor.
Convenience submenu
Key-dependent settings
The Key function allows you to define whether
settings for the following submenus are
stored with a key dependence:
R
Inst. cluster (instrument cluster)
R
Lighting
R
Vehicle
Using the steering wheel buttons
X
Press the V or U button repeatedly
until the Settings menu appears in the
display.
X
Press W or X to select the
Convenience submenu.
X
Press the & button to select the Key
function.
The selection marker is on the current
setting.
X
Press W or X to activate or
deactivate key dependency.
i
For safety reasons, it is not possible to set
the Key function while the vehicle is in
motion. You will see the following message
in the display: Setting only possible
at standstill
Trip computer menu
You can call up or reset statistical data for the
vehicle in the Trip computer menu.
Consumption statistics after start
Using the steering wheel buttons
i
When you call up the trip computer again,
it displays the last function called up.
The units of the statistical information
displayed are set permanently for each
specific country, and are therefore
independent of the units selected in the
Settings menu.
X
Press the V or U button repeatedly
until the display shows the After start
message.
:
Distance driven since start
;
Time elapsed since start
=
Average speed since start
?
Average fuel consumption since start
88
On-board computer with steering wheel buttons
Controls