Owners Manual

Accepting a call
You can accept a call at any time, provided
the mobile phone is ready to receive calls.
X
Press the 6 button.
The display shows the phone number and/
or the call duration.
Rejecting or ending a call
X
Press the ~ button.
The display shows the mobile phone
operational readiness symbol again.
Dialing a number from the phone book
You may select and dial a number from the
phone book at any time, provided the mobile
phone is ready to receive calls.
i
It is only possible to create new phone
number entries in the phone book using the
mobile phone itself. See the separate
operating instructions.
X
Press the V or U button repeatedly
until the TEL menu appears in the display.
The display shows the mobile phone
operational readiness symbol.
X
Press & or * to switch to the phone
book.
X
Press & or * to select the desired
name.
The display shows the stored names in
alphabetical order.
i
The display scrolls through the names
rapidly if you press & or * for longer
than 1 second. Releasing the button stops
the rapid scroll.
If you do not wish to make a call, press the
~ button.
X
Press the 6 button.
The on-board computer dials the
corresponding phone number. The display
shows the dialing message.
The on-board computer stores the phone
numbers in the redial memory.
When a connection is made, the display
shows the name of the other person and/
or the call duration.
Redialing
The on-board computer stores the last phone
numbers dialed. This means that you do not
have to search through the entire phone
book.
X
Press the V or U button repeatedly
until the TEL menu appears in the display.
The display shows the mobile phone
operational readiness symbol.
X
Press the 6 button.
The display shows the most recently dialed
numbers or names in the redial memory.
X
Press & or * repeatedly until the
number or name you are looking for is
displayed.
X
Press the 6 button.
The on-board computer dials the
corresponding phone number.
When a connection is made, the display
shows the name and/or the call duration.
If the name is not stored in the phone book,
the display shows the number you are
dialing.
Power supply
Battery isolating switch
Important safety notes
You can use the battery isolating switch to
disconnect the power supply to all your
vehicle's consumers. This will prevent
uncontrolled battery discharge caused by off-
load current consumption.
G
WARNING
If the vehicle is equipped with an additional
battery in the engine compartment, it is
necessary to disconnect both batteries when
working on the vehicle electrical circuit. Only
90
Power supply
Controls