Product Manual
Table Of Contents
- 25/30 EFI FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Boater's Responsibilities
- Outboard Remote Control Models
- Exhaust Emissions
- Lanyard Stop Switch
- Protecting People in the Water
- Passenger Safety Message - Pontoon Boats and Deck Boats
- Wave and Wake Jumping
- High-Speed and High-Performance Boat Operation
- Impact with Underwater Hazards
- Safety Instructions for Hand-Tilled Outboards
- Safe Boating Recommendations
- Conditions Affecting Performance
- Recording Serial Number
- Model Year Production Code
- Component Identification
- Specifications
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Cleaning Care
- EPA Emissions Regulations
- Inspection and Maintenance Schedule
- Maintenance Schedule Decal Icons
- Maintenance Schedule Decal
- Top Cowl Removal and Installation
- Cooling System
- Corrosion Control Anode
- Engine Oil
- Fuel System
- Gearcase Lubrication
- Lubrication Points
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Storage
- Troubleshooting
- Owner Service Assistance
- Maintenance Log
- General Information
The trim tab is an anode.
a - Trim tab
Additional anodes are located on the transom bracket, lower engine mount, and
swivel bracket. The number and location of the anodes depends on the model.
• Manual tilt models have three additional anodes.
Manual tilt model
a - Anode on lower engine mount
b - Anode on swivel bracket
c - Anode on transom bracket
• Power trim models have five additional anodes.
Power tilt model, bottom view
of transom
a - Anode on lower engine
mount
b - Anode on swivel bracket
c - Anodes (2) on transom
bracket
d - Anode on power trim cylinder
a
10236
74439
a
b
c
74353
a
b
c
c
d
MAINTENANCE
eng 93