Product Manual
Table Of Contents
- 25/30 EFI FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Boater's Responsibilities
- Outboard Remote Control Models
- Exhaust Emissions
- Lanyard Stop Switch
- Protecting People in the Water
- Passenger Safety Message - Pontoon Boats and Deck Boats
- Wave and Wake Jumping
- High-Speed and High-Performance Boat Operation
- Impact with Underwater Hazards
- Safety Instructions for Hand-Tilled Outboards
- Safe Boating Recommendations
- Conditions Affecting Performance
- Recording Serial Number
- Model Year Production Code
- Component Identification
- Specifications
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Cleaning Care
- EPA Emissions Regulations
- Inspection and Maintenance Schedule
- Maintenance Schedule Decal Icons
- Maintenance Schedule Decal
- Top Cowl Removal and Installation
- Cooling System
- Corrosion Control Anode
- Engine Oil
- Fuel System
- Gearcase Lubrication
- Lubrication Points
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Storage
- Troubleshooting
- Owner Service Assistance
- Maintenance Log
- General Information
Coat the entire propeller shaft with lubricant to prevent the propeller hub
from corroding and seizing to the shaft.
10189
2. Lubricate the following with 2‑4‑C with PTFE or Extreme Grease.
Description Where Used Part No.
Extreme Grease
Swivel bracket, tilt tube, transom clamp screws,
steering cable grease fitting
8M0071842
2-4-C with PTFE
Swivel bracket, tilt tube, transom clamp screws,
steering cable grease fitting
92-802859A 1
• Swivel bracket ‑ Lubricate through fitting.
74284
Swivel bracket grease fitting (manual tilt model shown, others similar)
MAINTENANCE
eng 105