Product Manual
Table Of Contents
- 25/30 EFI FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Boater's Responsibilities
- Outboard Remote Control Models
- Exhaust Emissions
- Lanyard Stop Switch
- Protecting People in the Water
- Passenger Safety Message - Pontoon Boats and Deck Boats
- Wave and Wake Jumping
- High-Speed and High-Performance Boat Operation
- Impact with Underwater Hazards
- Safety Instructions for Hand-Tilled Outboards
- Safe Boating Recommendations
- Conditions Affecting Performance
- Recording Serial Number
- Model Year Production Code
- Component Identification
- Specifications
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Cleaning Care
- EPA Emissions Regulations
- Inspection and Maintenance Schedule
- Maintenance Schedule Decal Icons
- Maintenance Schedule Decal
- Top Cowl Removal and Installation
- Cooling System
- Corrosion Control Anode
- Engine Oil
- Fuel System
- Gearcase Lubrication
- Lubrication Points
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Storage
- Troubleshooting
- Owner Service Assistance
- Maintenance Log
- General Information
2. Tighten the transom clamp bolts.
74492
3. Use a long drill bit to drill the two lower 8 mm (0.315 in.) holes through the
transom, using the transom clamps as a template for the bolt hole pattern.
a - Upper transom clamp hole
b - Lower transom clamp hole
4. Apply marine sealer to the shanks of the bolts. Do not apply marine sealer
to the threads of the bolts.
5. Secure the engine to the transom with the mounting hardware supplied
with the engine. Tighten the mounting hardware securely.
a - Bolt (2)
b - Washer (2)
c - Locknut (2)
a
b
15949
a
b
c
15729
INSTALLATION
30 eng