Product Manual

Table Of Contents
When first determining transom strength, use a dial torque wrench. If the bolt or
nut continues to turn without the torque reading on the dial increasing, it is an
indication that the transom is yielding. The load area can be increased by using
a larger washer or a transom reinforcement plate.
NOTE: The inside holes on the transom reinforcement plate are for the lower
transom bolts and the outside holes are for the upper transom bolts.
a - Large transom washer
b - Transom reinforcement plate
Description Part Number
Large transom washer 896392
Transom reinforcement plate 896305001
1. Use the transom drilling fixture for drilling the transom mounting holes.
a - Drill guide holes
b - Transom drilling fixture
c - Transom centerline
a
b
20860
2757
a
a
b
c
INSTALLATION
32 eng