Product Manual
Table Of Contents
- 25/30 EFI FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Boater's Responsibilities
- Outboard Remote Control Models
- Exhaust Emissions
- Lanyard Stop Switch
- Protecting People in the Water
- Passenger Safety Message - Pontoon Boats and Deck Boats
- Wave and Wake Jumping
- High-Speed and High-Performance Boat Operation
- Impact with Underwater Hazards
- Safety Instructions for Hand-Tilled Outboards
- Safe Boating Recommendations
- Conditions Affecting Performance
- Recording Serial Number
- Model Year Production Code
- Component Identification
- Specifications
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Cleaning Care
- EPA Emissions Regulations
- Inspection and Maintenance Schedule
- Maintenance Schedule Decal Icons
- Maintenance Schedule Decal
- Top Cowl Removal and Installation
- Cooling System
- Corrosion Control Anode
- Engine Oil
- Fuel System
- Gearcase Lubrication
- Lubrication Points
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Storage
- Troubleshooting
- Owner Service Assistance
- Maintenance Log
- General Information
Description Nm lb‑in. lb‑ft
Captive screw (7) 8.5 75 –
9. Use cable ties to secure the throttle, shift, and battery cables to the boat
harness, to prevent contact with the steering components.
74478
Steering Control Connections
STEERING BRACKET, STEERING CABLE INSTALLATION
1. Install the steering bracket with two washers and two 30 x 80 mm bolts.
Tighten the steering bracket bolts to the specified torque.
Description
Nm lb‑in. lb‑ft
Steering bracket bolt 30 – 22
2. Lubricate entire steering cable end with 2‑4‑C with PTFE.
10261
Description
Where Used Part No.
2-4-C with PTFE Steering cable end 92-802859A 1
3. Install the steering cable seal onto the end of the tilt tube.
INSTALLATION
eng 39