Product Manual
Table Of Contents
- 25/30 EFI FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Boater's Responsibilities
- Outboard Remote Control Models
- Exhaust Emissions
- Lanyard Stop Switch
- Protecting People in the Water
- Passenger Safety Message - Pontoon Boats and Deck Boats
- Wave and Wake Jumping
- High-Speed and High-Performance Boat Operation
- Impact with Underwater Hazards
- Safety Instructions for Hand-Tilled Outboards
- Safe Boating Recommendations
- Conditions Affecting Performance
- Recording Serial Number
- Model Year Production Code
- Component Identification
- Specifications
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Cleaning Care
- EPA Emissions Regulations
- Inspection and Maintenance Schedule
- Maintenance Schedule Decal Icons
- Maintenance Schedule Decal
- Top Cowl Removal and Installation
- Cooling System
- Corrosion Control Anode
- Engine Oil
- Fuel System
- Gearcase Lubrication
- Lubrication Points
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Storage
- Troubleshooting
- Owner Service Assistance
- Maintenance Log
- General Information
3. Install the loose end of the steering link onto the steering cable and
secure with a washer and locknut. Tighten the locknut securely and then
back the nut off 1/4 turn.
a - Washer
b - Locknut
4. Tighten the link rod screw to the specified torque.
5. Secure the link rod screw so it does not loosen and tighten the locknut to
the specified torque.
a - Link rod screw
b - Locknut
Description Nm lb‑in. lb‑ft
Link rod screw 27.1 – 20
Locknut 27.1 – 20
Battery Cable Connections
IMPORTANT: To prevent damage to the engine charging system when the
battery cables are not connected to a battery, ensure the battery cable ends
are thoroughly insulated.
a
b
59499
a
b
59500
INSTALLATION
42 eng