Product Manual
Table Of Contents
- 25/30 EFI FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Boater's Responsibilities
- Outboard Remote Control Models
- Exhaust Emissions
- Lanyard Stop Switch
- Protecting People in the Water
- Passenger Safety Message - Pontoon Boats and Deck Boats
- Wave and Wake Jumping
- High-Speed and High-Performance Boat Operation
- Impact with Underwater Hazards
- Safety Instructions for Hand-Tilled Outboards
- Safe Boating Recommendations
- Conditions Affecting Performance
- Recording Serial Number
- Model Year Production Code
- Component Identification
- Specifications
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Cleaning Care
- EPA Emissions Regulations
- Inspection and Maintenance Schedule
- Maintenance Schedule Decal Icons
- Maintenance Schedule Decal
- Top Cowl Removal and Installation
- Cooling System
- Corrosion Control Anode
- Engine Oil
- Fuel System
- Gearcase Lubrication
- Lubrication Points
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Storage
- Troubleshooting
- Owner Service Assistance
- Maintenance Log
- General Information
e. Tighten the clamp screw nut to the specified torque and install the
rubber boot.
Description Nm lb‑in. lb‑ft
Clamp screw nut 50 – 36.8
f. Tighten the 6 mm Allen socket head pivot screw to the specified
torque.
Description Nm lb‑in. lb‑ft
6 mm Allen socket head pivot
screw
24 – 17.7
•
Lanyard stop switch ‑ Refer to General Information ‑ Lanyard Stop
Switch.
NOTE: A spare lanyard stop switch clip is stored on the tiller handle.
a - Lanyard stop switch
b - Spare lanyard stop switch clip
c - Lanyard
• Engine stop switch ‑ Push the button in to stop the engine.
74501
a
b
c
74500
FEATURES AND CONTROLS
eng 57