Product Manual
Table Of Contents
- 25/30 EFI FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Boater's Responsibilities
- Outboard Remote Control Models
- Exhaust Emissions
- Lanyard Stop Switch
- Protecting People in the Water
- Passenger Safety Message - Pontoon Boats and Deck Boats
- Wave and Wake Jumping
- High-Speed and High-Performance Boat Operation
- Impact with Underwater Hazards
- Safety Instructions for Hand-Tilled Outboards
- Safe Boating Recommendations
- Conditions Affecting Performance
- Recording Serial Number
- Model Year Production Code
- Component Identification
- Specifications
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Cleaning Care
- EPA Emissions Regulations
- Inspection and Maintenance Schedule
- Maintenance Schedule Decal Icons
- Maintenance Schedule Decal
- Top Cowl Removal and Installation
- Cooling System
- Corrosion Control Anode
- Engine Oil
- Fuel System
- Gearcase Lubrication
- Lubrication Points
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Storage
- Troubleshooting
- Owner Service Assistance
- Maintenance Log
- General Information
SHALLOW WATER OPERATION
When operating the boat in shallow water, the outboard can be adjusted and
locked at a higher tilt angle. Operate the outboard at slow speed while tilted up
for shallow water operation. Keep the cooling water intake holes submerged in
the water, and continue to check for water discharge from the water pump
indicator hole.
74513
TILTING OUTBOARD TO FULL UP POSITION
1. Stop the engine. Move the lock lever to the free position. Take a hold of
the top cowl grip, and raise the outboard to the full tilt‑up position. Lock
the outboard in place by moving the lock lever to the lock position.
74514
2. Engage the tilt support lever.
3. Lower the outboard to rest on the tilt support lever.
LOWERING OUTBOARD TO RUN POSITION
1. Move the lock lever to the free position. Tilt the outboard up slightly, and
release the tilt support lever. Lower the outboard to the run position.
FEATURES AND CONTROLS
eng 61