Product Manual

Table Of Contents
a. Remove the three screws with washers securing the flywheel cover to
the top of the engine.
a - Screws with washers
(3)
b - Flywheel cover
b. Remove the flywheel cover from the engine.
3. Shift the outboard into neutral.
4.
Ensure that the lanyard stop switch is in the RUN position.
5.
Electric start models ‑ Ensure that the key switch is in the ON position.
!
WARNING
The exposed moving flywheel can cause serious injury. Keep your hands,
hair, clothing, tools, and other objects away from engine when starting or
running the engine. Do not attempt to reinstall the rewind starter or top cowl
when engine is running.
6. Tie one end of the emergency starter rope into a knot, place the knot into
one of the two flywheel cup notches, and wind the rope clockwise around
the flywheel cup.
74480
Emergency starter rope on flywheel cup (typical)
7. Pull the rope quickly.
NOTE: Several attempts to start the engine with the emergency starter rope
may be required.
a a
b
a
74314
OPERATION
eng 83