Installation & Assembly

STEP 2
Make sure you have one LEFT SIDE FRAME (A) and
one RIGHT SIDE FRAME (B). Take LEFT SIDE FRAME
(A) and RIGHT SIDE FRAME (B) with logo facing out
and right side up.
Connect large ends of EXPANDABLE RODS (C) to
RIGHT SIDE FRAME (B) with THUMB SCREWS (D)
through frame holes and screw into EXPANDABLE
RODS (C). Connect small ends of EXPANDABLE RODS
(C) to LEFT SIDE FRAME (B) with THUMB SCREWS
(D).
Make sure THUMB SCREWS (D) are tightened
clockwise.
Repeat step to assemble second shoe rack.
Place DOWELS (E) into the dowel holes of both
shoe rack frame bottoms. Shoe racks can be
placed side by side or stacked.
For stackable option, stack one shoe rack on the
other shoe rack, make sure the DOWELS (E) are
seated inside each hole.
When stacked, EXPANDABLE RODS (C) should be
identically placed, small ends on top of small ends.
Shoe racks can be expanded to desired width.
ASSEMBLY INSTRUCTIONS
STEP 1
A
D
E (8)
E
B
C
D (16)B (2)
C (8)
A (2)
E