Specifications

1. Start the engine and let it run until it reaches normal operating

temperature (the engine coolant temperature gauge indicator will be

near the center of the normal area between H and C).

2. While the engine idles, turn the steering wheel left and right several

times.

3. Turn the engine off.

3.0L V6 Vulcan engine

4. Check the fluid level on the

dipstick. It should be between the

arrows in the FULL HOT range. Do

not add fluid if the level is within

this range.

5. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the FULL HOT range. Be sure to put the

dipstick back in the reservoir.

3.0L DOHC V6 Duratec engine

4. Check the fluid level in the

reservoir. It should be between the

MIN and MAX lines. Do not add

fluid if the level is within this range.

5. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the range between the MIN and MAX lines. Be

sure to put the cap back on the reservoir.

FULL HOT

REVIEW COPY

2005 Sable (sab), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Maintenance and Specifications

231