Specifications

2. Start the engine.

3. Press and hold the INFO button for 2 seconds to select the

Compass/Odometer function. (Do not select Trip, DTE, or AFE. The top

of the message center must be blank).

Note: If the compass displays ⬙CAL 000000.0 mi⬙ instead of heading

information, the compass will need to be calibrated. Slowly drive the

vehicle in a circle (less than 3 mph [5 km/h]) until the ⬙CAL⬙ indicator

changes to display compass heading. This may take up to 3 circles to

complete calibration.

4. Determine your magnetic zone by

referring to the zone map.

5. Press and hold the RESET until

the message center display changes

to show the current zone setting.

6. Release the RESET control, then

slowly press RESET down again.

7. Press the SET control repeatedly

until the correct zone setting for

your geographic location is

displayed on the message center. To exit the zone setting mode press

and release the RESET control.

8. Press the RESET control to start

the compass calibration function.

123

6 7 8 9 1011

REVIEW COPY

2005 Sable (sab), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Driver Controls