User manual

User Manual
INTERFERENCE:
It is not suggested to use modified sine wave inverter to power acoustic equipment. As the modified sine
wave power signal will induce distortion signal to the sound signal within equipment if circuitry is not well
isolated. This will cause a continuous “hum” or “buzz” background noise.
Also inverter may cause interference to TV signals. The interference can be minimising by adding an inline
aerial filter between the TV and TV antenna. If the interference become obvious especially in weak signal
areas, please try to place the inverter as far away from the antenna as possible and use high quality
screened coax cable.
WARRANTY
All inverters are covered against defects in components and build quality for period of up to 12 months
from the day of purchase. Valid receipt or bank statement to show purchase date is within last 12 months
must be shown for warranty to be valid.
Any unit that has been misused, altered or accidentally damaged will not be covered by warranty.
Mercury will not be responsible for any damage cause as result of misconduct.
SPECIFICATION:
SPEC
MODEL
IMS150-12
IMS150-24
IMS300-12
IMS300-24
IMS600-12
IMS600-24
INPUT
VOLTAGE
10.8-
15.5Vdc
21.6-31Vdc
10.8-
15.5Vdc
21.6-31Vdc
10.8-15.5Vdc
21.6-31Vdc
EFFICIENCY
Over 80% Efficiency
POWER TYPE
Open & Seal Lead Acid Battery, Regulated DC Alternator
OUTPUT
CONTINUOUS
POWER
150W
150W
300W
300W
600W
600W
SURGE POWER
200% of Continuous Power for 2 sec to help starting up
AC VOLTAGE
230Vac ± 10% 50Hz
SIGNAL WAVE
FORM
Modified Sine Wave
USB
5Vdc, 1.0A
PROTECTIONS
2 Phases Low Battery Protection (warning and critical shutdown),
Input Over Power Protection,
Overload Protection,
Over Heat Protection,
Short Circuit Protection
DIMENSION (mm)
16x10x5.5
16x10x5.5
16x10x5.5
16x10x5.5
19x10x5.5
19x10x5.5
WEIGHT (kg)
0.65
0.65
0.65
0.65
0.83
0.83
AMBIENT WORK
TEMPERATURE
-15°C – 45°C
STORAGE
TEMPERATURE
-40°C – 85°C
HUMIDITY
20% - 90% non-condensing