Assembly Instructions
MERIDIAN SHINGLE Estimator
ROSS ROOF GROUP
P +1 916 838 1940 F +1 866 864 5410
WWW.ROSSROOFGROUP.COM
DETAIL ROOFING SYSTEM COMPONENTS
902 Starter
905 Barge Channel &
903 Barge Cover
Shingle Trim 400 & 904 Hip Under
Channel (optional)
906 Valley
708 Universal Channel &
715 Side Flashing
Shingle panel
901 Short Course & Pitch Change
715 Side Flashing & Head wall
provided by others
708 universal channel, 715 side
flashing, 901 short course
907 Underpan
901 Short Course
Trim 400
2
4
5
6
6
8
1
7
7
9
10
Meridian Shingle 30 pc per square (allow 15% waste)
Tape Measurer Nail gun
Hammer
Impact drill ¼” drive Soapstone
Aviation tin snips
(Right and Left)
Skillsaw with
min 24 carbide tooth
(corded or cordless)
Caulk gun Handbenders
CAUTION
• Dissimilar metals: LEAD and COPPER and any other dissimilar metals are not compatible shall(1) not come in contact with
and /or (2) leach onto’s products.
• Treatment lumber: Do not use pressure treated lumber i.e. decking or battens in conjuction with Ross Roof Group products.
• Fire treated decking and battens with copper or silver nitrates cannot be used.
CODE APPROVALS
Visit www.roofingusa.com and downloads installation guides and evaluation reports. Check with your local AHJ (Authority
Having Jurisdiction) to verify local building codes and any additional requirments.