Installation Instructions

15
16
INSTALLATION GUIDE
DETAIL A
Hip without Underchannel
1. Starting from the center of the hip, mark and cut the shingle panel and install.
2. Continue the panel install up and across roof.
3. The terminating panels on the left side of the hip should be marked and cut 2" long
to overlap the panels on the right side of the hip.
4. Finish by installing the shingle trip over the lapped panels.
NOTES
Shingle Trim 400
Meridian Panel
FIG. .B
DETAIL A CONTINUED
Hip
Meridian Panel
FIG. .A