Installation Instructions

INSTALLATION GUIDE

SAFETY STATEMENT

In any rooﬁng installation, safety is priority #1. Review and follow local, state and federal

safety guidelines.

ESTIMATING SHEET

Estimating sheet for Meridian products is available. Please contact your local sales

representative.

MERIDIAN ROOF SLOPE

Ross Roof Group rooﬁng systems should be installed on roof deck slopes 3:12 / 14° or

greater (optional vertical application). Roof decks having slopes less than 3:12 / 14° are

considered decorative and require a permanent rooﬁng membrane, which meets local

building codes requirements.

COLOR MATCHING

Ensure that only tiles of the same color code are dispatched for every roof lot. Where

possible, use tiles from the same date of manufacturing. (Date noted on the back of tiles)

STORAGE

Store in a dry place at all times before installation.

CAUTION

• Dissimilar metals: LEAD and COPPER and any other dissimilar metals are not compatible

shall (1) not come in contact with and / or (2) leach onto Ross Roof Group’s products.

• Treated lumber: Do not use pressure treated lumber i.e. decking or battens in conjunction

with Ross Roof Group products.

• Fire treated decking and battens with copper or silver nitrates cannot be used.

CODE APPROVALS

Visit www.rossroofgroup.com and dowload installation guides and evaluation reports.

Check with your local AHJ (Authority Having Jurisdiction) to verify local building codes and

any additional requirements.

Tools

Overview

Tape Measurer Nail gun

Hammer Impact drill ¼” drive Soapstone

Aviation tin snips

(Right and Left)

Skillsaw with

min 24 carbide tooth

(corded or cordless)

Handbenders

Caulk gun