Operation Manual

PREFACE
9
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Playing a disc
The compact disc player allows you to play an entire disc, or start playing
from any track. While a disc is playing you can go back to the start of the
track or skip to the start of the next track.
If you have programmed a selection, these functions also work with the
selection of tracks you have programmed. For information about
programming see Programming a selection, page 13.
To play the disc
• Press > (front panel or remote).
The display will show your
selection:
Play l
The display will then show
the track number and elapsed time:
1 00:12
To restart the current track
• Press [ (front panel or remote).
To move to the next track
• Press > (front panel or remote).
To play starting from a particular track
• Press ] or [ (front panel or remote) to step through the track numbers
until the track you want to play is displayed, or type the number of the
track (remote only).
For example:
Track 4
After a short delay the track you have selected will start to play.
If you have other
Meridian sources you should ensure
that the 808 is the currently selected
source.