Operation Manual

PREFACE

USING THE 808

SIGNATURE REFERENCE

CD PLAYER

Programming a selection

You can programme a selection of tracks and then play only the tracks you

have programmed.

You can programme a selection either by storing the tracks you want to

play, or by clearing the tracks you do not want to play. If you programme a

selection by storing the tracks you want to hear, you can play the tracks in

any order and repeat tracks in the sequence.

You can programme a selection while the disc is playing, in which case the

selection will be played after the current track ﬁ nishes.

To choose a track to programme

• Press [ or ] to step through the track numbers until the track you want

is displayed, or type the number of the track you want.

To make a selection by adding tracks

• Choose the ﬁ rst track you want to play, as described above.

The display will show the track

number; for example:

Track 14

• Press Store.

The track will change from Track to Store, and all the other tracks will be

marked Clear.

For example:

Store 14

You should store the ﬁ rst track for a selection within two seconds, or it will

begin to play.

To make a selection by omitting tracks

• Choose one of the tracks you do not want to play, as described above.

The display will show the

track number; for example:

Track 12

• Press Clear.

The track will change from Track to Clear, and all the other tracks will be

marked Store.

For example:

Clear 12