User guide

12
Installing the 810
Projector
Warning indicator
This indicator lights up when abnormality occurs on this
projector. For details, refer to Warnings using indicator
lights , page 56.
Operate button
Pressing this button for one second or longer when
in the standby mode (main power supply is ON) turns
on the power of the projector unit. Pressing it for one
second or longer when the power is ON switches the
projector to the standby mode.
RS232
This interface is for connection to the 810 Scaler.
Ethernet
This port should be led out to an accessible point for
service access.
USB
This port should be led out to an accessible point for
service access.