User guide

16
Installing the 810
Projector
When there is no shift to the left or
right
Install the projector such that the centre of the lens is
aligned with the centre of the screen.
When shift amount to the left is up to
25% (Lens S only)
Install the projector such that the centre of the lens is
aligned with the Qr position from the right edge of the
screen.
Movable range of projected image
(Lens S)
25%
50%
50%
25%
When light passes through the glass of
a projection booth
NOTE: When light passes through the glass, the
quantity of light decreases. Make sure that the glass of
the projection booth is not in more than one piece.
Do not use any material at all if possible.
If glass is used, mount it at an angle to reduce
reflections. Adjust the glass angle as well as the
installation angle of this unit accordingly to prevent
image degradation due to diffuse reflection.