User guide

23
Installing the 810
Scaler
Connections
Ethernet DVI Input
DVI Output 4
Trigger 3
Trigger
Output
IR
IN
Trigger 2
Sled Actuate Sled Power
Trigger 1
DVI Output 3 DVI Output 2 DVI Output 1
HDMI
Input
Meridian
Comms
USB
Host
RS232
Control
RS232
Projector
Quad DVI outputs
to projector
DVI
input
Ethernet HDMI
input
USB RS232
to projector
Trigger
outputs
Infra-red
repeater
Meridian
Comms
RS232
control
Video connections
Use this connection To connect to this
DVI Outputs 1 to 4 The corresponding DVI 1 to DVI 4 inputs on the 810 D-ILA Projector, using DVI cables.
HDMI Input The HDMI output of a video source, such as a Meridian G95 DVD Surround Receiver
System, using an HDMI cable. The sound channel is ignored.
DVI Input The DVI output of a video preamplifier or video source, using a DVI cable.
The video connections should be made with HD-quality
DVI to DVI, HDMI to HDMI, or DVI to HDMI cables.
Meridian recommends cable lengths no longer than 27
feet (8m) using standard cable. For longer cable runs,
an external equalizer/extender and good quality cable is
recommended.
Please consult Meridian if optical fibre DVI links are
to be used to verify we can meet the cable power
specifications.
if you need the audio on your HDMI source, ie HDMI
carries both, then you need a Meridian HD621 HDMI
Audio Processor to split the audio off to drive a
Meridian processor?