User guide

33
Setting up the 810
System
Stage 4: Other settings
The final stage allows you to configure other aspects of
the product’s operation.
To configure the other settings
Either:
Press Next after configuring the projector settings.
Or:
Press Wizard; see Configuration Wizard , page 28.
Press Skip to skip past the Reset settings, Proj.
settings, and Scaler settings stages.
The display shows the title screen for stage 4:
%NTER 3KIP"ACK
/THERSETTINGS
Press Enter to proceed.
•
•
•
•
The first setting is displayed:
z{|wxy"ACK .EXT
,ENSSLIDE
/N
The settings are summarised in the table below.
When you have finished configuring the settings:
Press Next to complete the Wizard.
The display shows:
%XIT 3TART"ACK
7IZARDCOMPLETE
Either:
Press Exit to return to standby.
Or:
Press Start to return to stage 1; see Configuration
Wizard, page 28.
•
•
•
Option Values Description
Lens slide
Off or On.
Enables the anamorphic sled.
Main system address
1 to 8.
Advanced setting.
Product address
1 to 8.
Advanced setting.
Use DHCP
No or Yes.
For configuration of the Ethernet port; for future expansion.
IP address For configuration of the Ethernet port; for future expansion.