User guide

42
Operating the 810
System
Using presets
The 810 Scaler allows you create up to seven user-
defined presets. Each preset defines a range of video
settings. For example, you could create a Football
preset which gives settings optimised for watching live
football matches on satellite television.
To display the presets
Press Preset on the remote control.
The Presets menu will be displayed:
This shows a list of the two built-in presets, Bypass
and Qdeo, and the seven user-definable presets.
The currently selected preset is indicated by a red bar.
To select a preset
Press A or V to highlight the preset you want to
select.
Press Enter.
The preset will be indicated by a red bar.
•
•
•
To assign the currently selected preset
to the current source
From the Presets menu press >.
The following menu is displayed:
Press Enter.
This will assign the current preset as the default preset
for the source.
To edit the currently selected preset
From the Presets menu press >.
Press V to highlight Edit:
Press >.
The Edit menu will be displayed:
•
•
•
•
•