Operating instructions

25
Menu Configuration
1 Image Adjust Menu
Permits image adjustment
Gamma
Switches the gradation characteristics of the
image. Select your preference setting values
according to the image to be viewed.
Setting Values: Normal, A, B, Custom
Default Value: Normal
• Setting to ‘Custom’ enables you to set a specific
gamma value via a computer connected to the
projector using Gamma adjustment software.
(Default picture quality is equivalent to ‘Normal’)
• You can download the Gamma adjustment soft-
ware from the Meridian website:
http://www.meridian-audio.com/
Color Temp.
Adjusts the colour temperature of the pro-
jected image.
Setting Values: D65, User1, User2
Default Value: D65
Red, Green, Blue
Setting Values: -255 to 0
Default Value: 0
• When you set the ‘Color Temp.’ setting to
‘User1’ or ‘User2’, adjustment of Red, Green
and Blue can also be carried out.
Test Pattern
Use this to adjust focus, screen size or picture
quality. There are 10 types of test patterns.
Press the ENTER or TEST button to alter the
test pattern to be projected. Press the EXIT
button twice to clear the test pattern.
Pixel Adjust
Fine-tunes the image position in the horizon-
tal/vertical directions.
• This is not required under normal circumstances.
H Pixel Adjust
Red, Green, Blue
Setting Values: 1 to 7
Default Value: 4
V Pixel Adjust
Red, Green, Blue
Setting Values: 1 to 7
Default Value: 4
NOTE:
‘H/V Pixel Adjust’ allows fine-tuning of images
in the horizontal and vertical directions up to
±3 pixels, at intervals of 1 pixel for each of
Red, Green and Blue. Display a still image with
a clear outline during adjustment. This fea-
ture is intended for fine-tuning of images and
therefore the effect upon adjustment may not
be visible to the eye.
2 Setup Menu
Menu Position
Adjusts the display position of the menu
screen.
Setting Values:
Default Value:
Mask
Masks (hides) the outer area of the projected
image.
Setting Values: 2.5%, 5%, Off
Default Value: Off
Flip H
Horizontally transposes left and right of the
image.
Setting Values: On, Off
Default Value: Off
Flip V
Vertically transposes (inverts) the image.
Setting Values: On, Off
Default Value: Off
Picture Shift
When projecting letterboxed images (with
black bands at the top and bottom, due to
the aspect ratio of the image being wider than
that of the projector), this setting can be used
to move the image up or down and thus elimi-
nate one of the bands or centre the image
between them as desired.
Setting Values: -30 to 30
Default Value: 0