Instructions / Assembly

Wire Connectors

LED Light Kit

Light Plate

Bolts

Glass Shade

LIGHT INSTALLATION

COLOR TEMPERATURE ADJUSTMENT

The LED light has 3 different color setting: Warm White (3000K), Daylight (4500K), and

Cool White (6000K). To adjust the light settings,

1. Press LIGHT on the remote control to turn on the LED light.

2. Press and hold the the LIGHT button until the LED light turns off.

3. Press and hold the the LIGHT button until the LED light turns on again with the next

color temperature in order.

Repeat these steps to cycle through the 3 color temperatures.

Step 1. Remove the pre-installed

bolts on the fan motor

assembly.

Step 2. Feed the wire connectors

through the middle of the

light plate. Install the light

plate onto the motor

assembly and secure it by

replacing and retightening

the bolts.

Step 3. Connect the LED light kit

to the light plate using its

magnetic suction-cup

bolts.

Step 4. Connect the wire plugs of

the LED light kit to the wire

connectors (blue to blue

and white to white).

Step 5. Fit the glass shade onto

the light plate and screw it

into place. Ensure it is

firmly connected to avoid

loosening during use.