Instructions / Assembly

CANOPY AND COVER INSTALLATION

FAN BLADE INSTALLATION

Step 1. Remove the bolts and flat washers

pre-installed on the blade holder

underneath the fan motor assembly.

Step 2. Fit the blades in place on the blade

holder.

Step 3. Making sure the blades are straight,

secure them by replacing and

retightening the bolts and washers.

Step 1. Tuck all the connections neatly into the outlet box.

Step 2. Slide the canopy up to the ceiling mounting bracket and place the key hole slots

over the mounting screws or bolts on the bracket. Rotate the canopy until the

screw or bolt heads lock in place at the narrow section of the key hole.

Step 3. Attach the canopy cover to the bottom of the canopy and screw it into place.

Ceiling Mounting

Bracket

Canopy

Canopy Cover

Mounting Screws/Bolts

Outlet Box

Bolt

Blade