Instructions / Assembly

Assembly Instruction Manual SKU: HCF-1602-00
NOTE: ALWAYS TURN OFF BEFORE INSTALL LIGHTING FIXTURE
This fixture has been rated for up to 60-watt maximum Edison-E12 standard bulbs (Not Included).
To avoid the risk of fire do not exceed the recommended wattage.
Electrical, Plumbing, or Gas lines may be in wall. Before cutting, drilling or hammering verify the
location. If needed, please contact your electrician, plumber or service person.
Please read all instructions carefully. Do not plug the power cord into the outlet until the lamp is fully
assembled. Each part has been assigned a name as following shown.
ASSEMBLY INSTRUCTIONS:
1、Please take out all of the lamp parts from the package box.
2、Put the plastic screw caps (orange) on the ceiling
3、Push the wall plate to the position of the screw cap hole
4、Use screws to lock the wall plate to the ceiling
5、Wiring be sure no bare wire is exposed.
6、Install the canopy on the wall plate
7、Lock the iron particle on the canopy
8、Put the Bulb onto socket and turn clockwise to tighten, and you can use it.
Thanks for your purchase. Any questions please don't hesitate to contact us; we'll resolve all your
problem ASAP. Customers are always the best teachers for us to keep growing!
Should you have any questions or concerns, please do not hesitate to contact us by
emailing: [e-mail]