Instruction Manual
11
ΒΌ
Risk of fatal injury
from electrical current.
The device may only be installed and connected
by skilled electricians. Observe the country-
specific regulations.
|
Installation notes
The required screws and plugs are included with
the delivery.
The wind sensor (art. no. 580692) or the wind sensor
with heating (art. no. 580690) is installed on the roof or
the outside wall of the building. It must be mounted in
a position suitable for measuring the wind strength. The
device must therefore not be mounted in the slipstream
of any objects. Ensure that the device is mounted in the
correct position.
Installing the wind sensor,
wind sensor with heating