Instruction Manual

14
Test m o d e
Positions 1 and 2 activate the test mode: The optical
display (test LED, Figure !3) lights up after a
maximum of one second. If the rotary sensor is rotated,
the test LED flickers at the frequency of the rotational
speed and one can test that the unit is working even
when the rotational speed of the rotary sensor is low.
Wind strength evaluation
Position 3 - 0 defines the wind strength at which the
blinds are raised. The setting is made in Beaufort (Bft)
units, see Figure §.
After exiting the test mode, it takes the unit about
4 seconds for the device to evaluate the set wind force.
The selected setting will be applied after a maximum of
4.5 minutes after switching from one wind strength to
another.