Product Manual

BOX CONTENTS

QTY. PART CODE DESCRIPTION

4 321108300 Outriggers

4 VB-HMLM8X20 Tightening knobs

4 I-C1CAS6 Casters

12 I-CAS5PIN Locking pins

ENGLISH

ASSEMBLY INSTRUCTIONS

Erect the scaffold (one or two

frames high) by following the

manufacturer instructions.

Lock outrigger into place by using two locking pins. If you use

scaffolding with casters, you must first remove the locking pin of the

caster to attach the outrigger and then replace the locking pin to lock

the caster and base of the outrigger.

Install caster into outrigger and

secure it with lock pin. Set caster

brake. Repeat with the other casters.

Firmly tighten the tightening

knob so that the scaffolding

and the outrigger are perfectly

lined up and united.

Place outrigger to end scaffold

frame at a 90° angle to the side

brace.

ESPAÑOL