Product Manual

Revision: December 2015
Page 3
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE LIMITS
No exposure limits value known.
EXPOSURE CONTROLS
Respiratory Protection: Product processing, heat sealing of film or operations
Involving the use of wires or blades heated above 300°C may
produce dust, vapor or fumes. To minimize risk of overexposure to
dust,vapor or fumes it is recommended that a local exhaust
system is placed above the equipment, and that the working
area is properly ventilated. If ventilation is inadequate, use
certified respirator that will protect against dust/mist.
Skin and Body Protection: Hot material: Wear heat-resistant protective gloves, clothing
and face shield able to withstand the temperature of the
molten product. Cold material: None required; however, use
of gloves is good industrial practice.
Hand Protection: Hot material: Wear heat-resistant protective gloves able to
withstand the temperature of the molten product.
Cold material: None required; however, use of gloves is good
industrial practice.
Eyes Protection: Safety glasses with side shields. Use dust goggles if high dust
concentration is generated.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Solid (Pellet Form)
ODOR: Paraffin-like
COLOR: Off-white
MELTING POINT: 125 to 135 °C
BOILING POINT: Non allocated
FLASH POINT: Not applicable
VAPOR PRESSURE: Not applicable
DENSITY: 0.945 – 0.970 g/cm3
AUTO-IGNITION: 350°C approx.
TEMPERATURE
XPLOSIVE PROPERTIES: High dust concentrations have a potential for sparking or
explosion
WATER SOLUBILITY: Negligible
Disclaimer: To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication; however, we do not assume any liability what so ever for the
accuracy and completeness of such information. We make no warranties which extend beyond the description contained herein. Nothing herein shall constitute any implied warranty of
merchantability or fitness for a particular purpose. It is the customer's responsibility to inspect and test our products in order to satisfy itself as to the suitability of the products for the customer's
particular purpose. The customer is responsible for the appropriate, safe and legal use, processing and handling of our products. No liability can be accepted in respect of the use of our products in
conjunction with other materials. The information contained herein relates exclusively to our products when not used in conjunction with any third party materials.