M-MTE13100 Revision: A. First Version ________________________________________________________________________________________________________ 1) General information: The M-MTE13100 is a scaffolding tarp for exterior scaffold or structures. This product has these features: Weather protection for the 4 seasons. Temporary heating shelters. Highly resistant flame retardant (corresponding to standard NFPA701). Provides additional Jobsite protection for both the workers and for the public.
) Details of the product: The roll size is about 13’ by 100’ corresponding to 1300 square foot. When shipped , the Tarp is folded in two. The dimensions are as below. The weight of this product is 69 lbs by roll. The color is white with blue stripes. The surface density is about 250 grams per square meters. The tarp does not let the light pass. (Shade is 100 %). U.V.
It is also possible to use plastic screw connector (M-MTESCREW). You insert it into the eyelet and turn it to connect the tarp together. 4) Caracteristics of the Tarp and connector In the table below, here are some informations about the Tensile strength, Tear strength, elongation of the tarp and bungee connector. You have also the result of the mullen burst test for the tarp.
5) Material Safety Data sheet (MSDS) This product is principally made with HDPE 3392, LLDPE 9730 and Calcium carbonate compound (Calpet) that are B-1000 and W-500. The four substances can not be separated to make the final product that is called M-MTE13100. 4 The mesh without the coating (film) is made with HDPE 3392 and Calcium Carbonate. The mesh with the coating is made with HDPE 3392, LLDPE 9730 (coating) and Calcium Carbonate.
The following pages present the Material safety Data sheets of the four substances that compose the product. In order, you have the MSDS of: a. The Calcium Carbonate compound (Calpet) type : B-1000 and W-500. b. The High-density polyethylene (HDPE 3392). c. The Linear low-density polyethylene (LLDPE 9730).
Material Safety Data Sheet MSDS No. : 01-20130722-3200E 1. IDENTIFICATION OF THE SUBSTANCE OR MIXTURE AND OF THE SUPPLIER 1.1. Product identifier : CALCIUM CARBONATE COMPOUND (CALPET) (SW-200, SG-200C, W-500, B-1000, BI-1000, EC-60C, SG-280, SW-150) 1.3. Recommended use of the chemical and restriction on use Recommended use : A base material of plastic goods Restriction on use : Film, extrusion, injection 2. HAZARDS IDENTIFICATION 2.1.
Material Safety Data Sheet Response MSDS No. : 01-20130722-3200E P312 Call a POISON CENTER/doctor if you feel unwell. P321 See First-aid measures on this MSDS. P302+P352 IF ON SKIN : Wash with plenty of water. P304+P340 IF INHALED : Remove person to fresh air and keep comfortable for breathing. P332+P313 If skin irritation occurs : Get medical advice/attention. P337+P313 If eye irritation persists : Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse.
Material Safety Data Sheet 1-BUTENE, POLYMER - WITH ETHENE MSDS No. : 01-20130722-3200E CAS No. 25087-34-7 2 % 4. FIRST-AID MEASURES 4.1. Eye contact - If eye irritation persists : Get medical advice/attention. - IF IN EYES : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. 4.2. Skin contact - If skin irritation occurs : Get medical advice/attention. - Take off contaminated clothing and wash it before reuse.
Material Safety Data Sheet MSDS No. : 01-20130722-3200E 6. ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures - Cleaning up immediately, and follow the precaution. - Remove all ignition sources. - If not danger, stop to leak. - If no protective equipment, do not touch exposure material and container. - Notice the avoid conditions and materials. - Do not breathe dust/gas/mist/vapours/spray. 6.2.
Material Safety Data Sheet MSDS No. : 01-20130722-3200E - Keep air pollution under exposure standard when occur fume or mist in handle. 8.3. Individual protection measures (personal protective equipment) Respiratory protection - Chemical resisted respiratory protection Eye protection - Chemical resisted eye protection Hand protection - Chemical resisted hand protection Skin and body protection No data available 9. PHYSICAL AND CHEMICAL PROPERTIES 9.1.
Material Safety Data Sheet MSDS No. : 01-20130722-3200E 10.3. Incompatible materials - Combustible materials - Reducing materials 10.4. Hazardous decomposition products - Irritation, corrosive gases may be occurred in fire-emergency. 11. TOXICOLOGICAL INFORMATION 11.1. Information on the likely routes of exposure POLYETHYLENE 1-BUTENE, POLYMER - May be harmful for human. WITH ETHENE - In single exposure, may be occurred burns. 11.2. Health hazards information 11.2.1.
Material Safety Data Sheet MSDS No. : 01-20130722-3200E 11.2.6. Germ cell mutagenicity CALCIUM CARBONATE - In vitro Salmonella typhimurium Ames test : Negative ※ Source : NLM/CCRIS 11.2.7. Carcinogenicity POLYPROPYLENE - IARC : Group 3 POLYETHYLENE - IARC : Group 3 ZINC STEARATE - ACGIH : A4 (Stearates) 11.2.8. Toxic to reproduction No data available 11.2.9. Specific target organ toxicity (Single exposure) CALCIUM CARBONATE - Respiratory tract irritation.
Material Safety Data Sheet MSDS No. : 01-20130722-3200E 13.1. Methods of disposal - Follow federal, state and local regulations. 13.2. Caution of disposal - Consider the notice in regulations. 14. TRANSPORT INFORMATION 14.1. IMDG Code No data available 14.2. Other transport regulations DRG No data available RID No data available ADR No data available AND No data available 14.3. Special precautions which a user needs to be aware of, or needs to comply with No data available 15.
Material Safety Data Sheet MSDS No. : 01-20130722-3200E ※ Copyright Ⓒ by International Institute of Conformity Assessment Korea MSDS Testing Laboratory CO., LTD. All right Reserved. The manager G. D. Park and H. S. Bae Address #407, ACE PLAZA, 848-3, Jung-dong, Giheung-gu, Yongin-city, Gyeonggi-do, Korea. Telephone + 82 31 286 1139/0139 Homepage http://www.msds.re.kr Fax + 82 31 286 3539 e-mail msdsghs@naver.
MATERIAL SAFETY DATA SHEET 1. Identification of the substance or mixture GHS product identifier : HDPE 3392 Recommended use of the chemical and restrictions on use. Recommended use: Industrial resin. Restrictions on use: Used for recommended use. 2. Hazards identification GHS classification of the substance/mixture: Serious Eye Damage/ Irritation: Category 2B GHS label elements, including precautionary statements.
health: 1 fire: 1 reactive: 0 3. Composition/information on ingredients Chemical Name Common Name Synonyms CAS number Content (%) HIGH DENSITY POLYETHYLENE HDPE 9002-88-4 >99.5 Additives - - <0.5 4. First aid measures Eye contact: If you occur symptoms, keep away from exposure. Flush eyes with running water for more than 15 minutes. Call a POISON CENTER or doctor/physician if you need.
Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. 5. Firefighting measures Suitable (and unsuitable) extinguishing media Suitable extinguishing media: Dry chemical, CO2, water, regular foam. unsuitable extinguishing media: Do not use straight streams. In case of major fire and large quantities: Use dry chemical or water spray.
o ELIMINATE all ignition sources. 7. Handling and storage Precautions for safe handling: Avoid heat, sparks, flames and other sources of ignition. Do not eat, drink or smoke in product area. In pneumatic conveying and machine operation, take care the occurrence of dust. To reduce the potential for dust explosion suppression, the ground connection caused static electricity. Try not to be the accumulation of dust. Conditions for safe storage: Store in a closed container.
-Build a shower booth near the place. Hand protection: -If you contact with heated material, wear heat durability gloves. Body protection: -If you contact with heated material, wear heat durability protective equipment. 9.
10. Stability and reactivity Chemical stability: Stable under normal temperatures and pressures. Possibility of hazardous reactions: No dangerous reaction under conditions of normal use. Conditions to avoid (e.g., static discharge, shock or vibration): May decompose over 350℃ (662℉). Incompatible materials: Nitrate, chlorate, peroxides, strong acid. Hazardous decomposition products: Methane, Propane, Carbon oxide, Aldehyde, Organic Vapor. 11.
-Acute Exposure tested the sensitization potential of polyethylene on 34 female albino Dunkin Hartley guinea pigs (299-364 g, 8-12 weeks old). Polyethylene did not cause skin sensitization in any of the guinea pigs tested. Carcinogenecity: Not classified -IARC: 3 -ACGIH, NTP, OSHA, EC Directive 1272/2008, US EPA: not listed -Using a mouse or a rat carcinogenicity studies found in the ovarian cancer and uterine sarcoma, but its population is just less carcinogenic in classification is not enough data.
-Thermosetting waste synthetic resins and other waste synthetic polymer compounds shall be crushed, cut or melted to a size at which the maximum diameter is 15 cm or less and thereafter be disposed in a stable landfill facility. -Non-thermosetting waste synthetic resins and other waste synthetic polymer compounds shall be incinerated.
OSHA: Not regulated CERCLA: Not regulated EPCRA 302: Not regulated EPCRA 304: Not regulated EPCRA 313: Not regulated TSCA Section 8(b) Inventory : XU FDA - Direct Food Additives: 21 CFR 172.
revision number: 1 date of the latest revision: 31 Jan 2014 The information contained herein is to the best of our knowledge and belief accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee for result obtained, and assume no responsibility for damages incurred by use of this product. It is the responsibility of the user to comply with all federal, state and local laws and regulations.
MATERIAL SAFETY DATA SHEET 1. Identification of the substance or mixture Recommended use of the chemical and restrictions on use. Recommended use: Industrial resin. Restrictions on use: Used for recommended use. 2. Hazards identification GHS classification of the substance/mixture: Serious Eye Damage/ Irritation: Category 2B GHS label elements, including precautionary statements. Pictogram and symbol: Not applicable Signal word: Warning Hazard statements: H320: Causes eye irritation.
NFPA health: 1 fire: 1 reactive: 0 3. Composition/information on ingredients Chemical Name Common Name Synonyms CAS number Content (%) LINEAR LOW-DENSITY POLYETHYLENE LLDPE 9002-88-4 >99.8 Additives - - <0.5 4. First aid measures Eye contact: If you occur symptoms, keep away from exposure. Flush eyes with running water for more than 15 minutes. Call a POISON CENTER or doctor/physician if you need.
Depending on the response of each patient symptoms and clinical status of the management check. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. 5. Firefighting measures Suitable (and unsuitable) extinguishing media Suitable extinguishing media: Dry chemical, CO2, water, regular foam. unsuitable extinguishing media: Do not use straight streams. In case of major fire and large quantities: Use dry chemical or water spray.
Large spill: o Make an embankment for further processing. o ELIMINATE all ignition sources. 7. Handling and storage Precautions for safe handling: Avoid heat, sparks, flames and other sources of ignition. Do not eat, drink or smoke in product area. In pneumatic conveying and machine operation, take care the occurrence of dust. To reduce the potential for dust explosion suppression, the ground connection caused static electricity. Try not to be the accumulation of dust.
-Wear appropriate glasses to protect from scattering toxic substance. -If you contact with heated material, wear heat durability face shield. -Build a shower booth near the place. Hand protection: -If you contact with heated material, wear heat durability gloves. Body protection: -If you contact with heated material, wear heat durability protective equipment. 9.
Molecular weight: 1500 - 100,000g/mol 10. Stability and reactivity Chemical stability: Stable under normal temperatures and pressures. Possibility of hazardous reactions: No dangerous reaction under conditions of normal use. Conditions to avoid (e.g., static discharge, shock or vibration): May decompose over 350℃ (662℉). Incompatible materials: Nitrate, chlorate, peroxides, strong acid. Hazardous decomposition products: Methane, Propane, Carbon oxide, Aldehyde, Organic Vapor. 11.
Respiratory sensitizer: Not available Skin Sensitization: Not classified -Acute Exposure tested the sensitization potential of polyethylene on 34 female albino Dunkin Hartley guinea pigs (299-364 g, 8-12 weeks old). Polyethylene did not cause skin sensitization in any of the guinea pigs tested.
1) Disposal method: • Method for disposing waste synthetic polymer compounds -Thermosetting waste synthetic resins and other waste synthetic polymer compounds shall be crushed, cut or melted to a size at which the maximum diameter is 15 cm or less and thereafter be disposed in a stable landfill facility. -Non-thermosetting waste synthetic resins and other waste synthetic polymer compounds shall be incinerated.
U.S.A Safety phrases: Not available EU REACH SVHC Free Certified(Candidate list Updated by ECHA on 16th Dec, 2013) management information OSHA: Not regulated CERCLA: Not regulated EPCRA 302: Not regulated EPCRA 304: Not regulated EPCRA 313: Not regulated TSCA Section 8(b) Inventory : XU FDA - Direct Food Additives: 21 CFR 172.
Issuing date: 30 July 1996 Revision number and date revision number: 1 date of the latest revision: 31 Jan 2014 The information contained herein is to the best of our knowledge and belief accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee for result obtained, and assume no responsibility for damages incurred by use of this product. It is the responsibility of the user to comply with all federal, state and local laws and regulations.