Product Manual

8 / 10

-Thermosetting waste synthetic resins and other waste synthetic polymer compounds

shall be crushed, cut or melted to a size at which the maximum diameter is 15 cm or

less and thereafter be disposed in a stable landfill facility.

-Non-thermosetting waste synthetic resins and other waste synthetic polymer compounds

shall be incinerated.

2) Matters which require attention when disposing waste:

• Standard and method for disposing the designated waste

-All the generated waste shall be disposed in accordance with the specific standard and

method prescribed in the Act so that the environmental pollution may be minimized in

the course of collecting, carrying, keep and disposing the waste.

-The waste shall not flutter or flow out, and a bad smell shall not be diffused.

-The pollutants shall be disposed below the allowable exhaust standard.

-Without just reason, the waste shall not be discarded in a place other than the

designated places.

-The waste shall be disposed in the waste disposal facility.

14. Transport information

UN Number: Not applicable

UN Proper shipping name: Not applicable

Transport Hazard class: Not applicable

Packing group: Not applicable

Marine pollutant: Not applicable

Special precautions

 in case of fire: Not applicable

 in case of lickage: Not applicable

15. Regulatory information

Korea:

 Occupational Safety and Health Regulation: Not regulated

 Toxic Chemical Control Act : KE-28877

 Dangerous Material Safety Management Regulation :

-Symthetic resins is stored more than 3,000kg and handling may be classified as

flammable. In this case, 'Item, the maximum quantity, and handling firearms ban'

Display the target, the installation height and area, for fire protection facilities

between the clearance and may be limited.

 Wastes Control Act : Designated waste (Polyethylene, 01-01-01)

EU classification:

 Classification: Not available

 Risk phrases: Not available

 Safety phrases: Not available

 EU REACH SVHC Free Certified(Candidate list Updated by ECHA on 16th Dec, 2013)

U.S.A management information