User Manual
9
Transfer the latest firmware image to an
external USB drive.
Power down the Station with the switch located
on rear enclosure. Disconnect the hand-piece
from the station.
Plug in the external USB drive to the USB port in
the back of the station.
Press and hold Menu and ⮠ buttons
simultaneously while switching the power
button ON for 3 seconds.
Once the firmware is loaded successfully, the
power station should display “Cartridge Open”.
Reconnect the hand-piece to the station
and turn the power OFF, then back ON.
Verify the firmware version by observing
the startup page. The model and version
will be displayed for a few seconds before
transitioning to the home status screen.