User`s guide

Visual Indicators

There is a red and green LED at the top of the scanner. These LEDs indicate

the status of the scan and scanner.

No Red or Green Illumination of the LEDs will not occur if

the scanner is not receiving power from the

PC and if the scanner is receiving power but

has remained dormant for a specified time

thus turning the laser and motor off.

Red Flash; Green Flash; When the scanner first receives power,

Steady Red the red LED will flash, followed by the

green LED, and then the scanner will beep

once.

Steady Red When the laser is on, the red LED will also

be on. This occurs when an object is in the

scan field.

Steady Red; Green Flash When the scanner successfully reads a bar

code, the green LED will flash then beep

once.

Repetitive Red Flashes When the red LED flashes several times while

it lays upon a stationary surface, then an

object is within the scan field and is activating

the IR sensor. This can occur even while the

scanner is lying upon the counter or cradle. To

eliminate this disturbance, direct the scan

window toward a different location.

Steady Green After a successful scan, the scanner transmits

the data to the host device. When the host is

ready to accept the information, the scan-

ner’s green LED will remain on until the

data can transmit.