User`s guide

Figure 6

IR Sensor Activation

The scanning process is initiated by an infrared (IR) device that is below the

output window. The signal extends approximately eight (8) inches beyond the

output window in long range mode and in short rang mode, it extends

approximately three (3) inches (Refer to Figure 6). The IR device remains

active as long as power is applied to the unit.

When the unit remains dormant for a time, the laser will turn off. In this stage,

the scanner’s computer is on “standby”. To reactivate the unit, wave an object

in front of the IR sensor or pick up the scanner and direct the output window

downwards.