Datasheet

© 2014 METZ CONNECT - Subject to modifications!
METZ CONNECT GmbH
Im Tal 2 | 78176 Blumberg | Germany
Ph. [phone] | Fax [phone]
Additional documentation see www.metz-connect.com
Technical data
Page 2/4
Approvals
C-UL Certification Open Energy Management Equipment 34TZ
BACnet interface
Protocol BACnet MS/TP
Address range 00 to F9
Transmission rate 9600 to 115200 Bit/s, factory setting 9600 Bit/s
Cabling RS485 two wire bus
with potential equalization in bus or line topology
terminate with 120 Ohm
Supply
Operating voltage 24 V AC/DC ± 10 % (SELV)
Current consumption 85 mA (AC) / 75 mA (DC)
Relative duty cycle 100 %
Inputs
Digital inputs 10
Voltage input 30 V DC
High signal reognition >7 V AC/DC
Housing
Dimensions WxHxD 1.378 x 2.728 x 2.362 in. (35 x 69.3 x 60 mm)
Weight 83 g
Mounting position any
Mounting on TH35 rail per IEC 60715
Side-by-side mounting Without space
The maximum quantity of BACnet modules connected side-by-side is
limited to 15 or to a maximum power consumption of 2 Amps
(AC or DC) per connection to the power supply. For any similar block
of additional modules a separate connection to the power supply is
necessary.
Material
Housing polyamide 6.6 V0
Terminal blocks polyamide 6.6 V0
Cover polycarbonate
Type of protection (IEC 60529)
Housing IP40
Terminal blocks IP20
2016 -11-11
Data sheet
BMT-DI10
BACnet module with digital inputs
Part number
1108811319