User manual

• modular Cat.6

termination unit RJ45

• mounting version: Keystone, 270° cable feed

• solid, one-piece and reusable module housing refined

with zinc die-casting

• mounting without special tools; strain relief directly

snapped on to stuffer cap

• easy to install connection of data lines AWG 26/1 to

22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire)

to insulation displacement connectors (IDC)

• intelligent cable management in stuffer cap - also

suitable for heavily twisted cables

• conductor assignment to T568A and T568B is directly

printed on the stuffer cap

• certified to GHMT Cat.6

re-embedded PVP

• component testing for Cat.6

to ISO/IEC 11801

Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-

568-C.2 (2009-08) and IEC 60603-7-51 Ed.1

(12/2008), certified to GHMT

• compliance with class E

up to 500 MHz to ISO/IEC

11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09

• tested: component up to 600 MHz, link up to 800 MHz

• for 10 GBit Ethernet (IEEE 802.3an)

• suitable for Power over Ethernet (PoE, PoE plus and

UPoE)