Operation Manual

• After a series of flashes with full power and short inter-

vals, a pause of at least 3 minutes must be observed

after each series of 20 flashes!

• When taking a series of flash shots at full light output

and with rapid recycling times due to the high level of

thermal energy.

2 Dedicated flash functions

Dedicated flash functions are flash functions that have

been specially adapted to a given camera system.

Depending on the type of camera, different flash

functions are supported.

26AF-1 digital Canon

• Flash-ready indication in camera viewfinder/

camera display

• Automatic flash sync speed control

• E-TTL flash mode / E-TTL II flash mode

• Automatic fill-in flash control

• Manual flash exposure correction for E-TTL / E-TTL II

(set on the camera if possible)

• Flash exposure storage FE with E-TTL / E-TTL II

• 1st or 2nd curtain synchronisation (REAR)

(must be supported by the camera)

• AF auxiliary light control (set on the camera if possible)

• Programmed auto flash mode

• Wireless remote slave E-TTL/M flash mode (set on the

camera if possible)

• Wake-up function for the flash unit