Operation Manual

96
k
in the display can change and be adjusted to the
correction factor (depending on the camera model)!
After the shot, remember to cancel the TTL flash
exposure correction in the camera!
Strongly reflecting objects in the motif can have a
negative impact on the camera’s automatic exposure.
The photograph will be underexposed. Remove
reflecting objects or set a positive correction value.
5.4 Remote slave flash mode
Applicable to all versions:
The slave flash units must be able to receive the light
from the master or controller flash unit with the
integrated slave sensors

for the remote mode. Set the
group and the remote channel on the camera, the
master or the controller flash unit.
5.4.1 26AF-1 digital Canon
The flash unit supports Canon`s wireless E TTL Remote
System in slave flash mode (set on the camera if
possible).
Wireless remote control of one or more slave flash units
by one master or controller flash unit on the camera
(for example, mecablitz 64AF-1 digital Canon) or by the
camera master (depending on the camera type) is thus
possible
For slave flash unit 26AF-1 digital, slave group A as well
as all remote channels 1, 2, 3 and 4 are always set.
5.4.2 26AF-1 digital Nikon
The flash unit supports the wireless Nikon remote
system in slave flash mode (set on the camera if
possible) and is compatible with the Nikon “Advanced
Wireless Lighting” system.
Here wireless remote control of one or more slave flash
units by a master flash unit (depending on the camera
type) on the camera (e.g. mecablitz 64AF-1 digital
Nikon) or by the camera’s master is possible.
For slave flash unit 26AF-1 digital, slave group A as well
as all remote channels 1, 2, 3 and 4 are always set.
5.4.3 26AF-1 digital Olympus
As a slave flash unit (set on the camera if possible), the
flash unit is compatible with the wireless Olympus RC
flash system (RC = remote control).
Here wireless remote control of one or more slave flash
units by a master flash unit (depending on the camera
type) on the camera (e.g. mecablitz 64AF-1 digital
Olympus) or by the camera’s master is possible.
For slave flash unit 26AF-1 digital, slave group A as well
as all remote channels 1, 2, 3 and 4 are always set.