User Manual

150
k
Setting the mode of operation
• Switch on the flash unit with the

button.
The start screen appears. Thereafter, the flash
unit always switches on with the mode of operati-
on that was used last.
• Tap the shutter release to transfer data between
the flash unit and the camera.
• Press the  button and the drop-down
menu will appear.
• Use the  buttons to select the ope-
rating mode.
• Press the
°  button and confirm the selected
operating mode.
The setting will take effect immediately.
Second curtain synchronisation (REAR) is automati-
cally deactivated when the flash unit is set to high-
speed synchronisation HSS!
E TTL HSS
7.6 LED Video Light
With the LED and video light modes, you can exami-
ne recordings of moving pictures at close range.
Setting the mode of operation
• Switch on the flash unit with the

button.
The start screen appears. Thereafter, the flash
unit always switches on with the mode of operati-
on that was used last.
• Press the  button and the drop-down
menu will appear.
• Use the  buttons to select the opera-
ting mode.
• Press the °  button and confirm the selected
operating mode.
• Use the  buttons to select the desired bright-
ness.
The setting will take effect immediately.
LED
+
MODE
ETTL
ETTL HSS
M
MODE
MHSS
LED
MASTER
E
LED
EV
+1 1/3
6.9m
ETTL
HSS