User Manual

158
k
10.1.3 Setting the exposure correction (EV) in ETTL
mode on the master flash unit
• Press the  buttons repeatedly and set an
exposure value (EV).
The setting is adopted immediately.
10.1.4 Lighting conditions (RATIO) for the flash
groups settings on the master flash unit
The lighting conditions of the flash groups (A, B, C)
can be set proportionally in order to obtain specific
lighting effects. The lighting conditions for all
groups are controlled exclusively via the master
flash unit.
Defining the lighting conditions (RATIO
• Press the  button and the menu
will appear.
• Use the buttons  to select .
• Press the
°  button and open the menu.
• Using the  buttons, select one of the follo-
wing menu items.
all three groups are the same (RATIO Off).
Ratio of group A to group B.
Ratio of group A to group B plus an exposu-
re correction (EV) for group C.
• Press the
°  button and confirm the selected
setting.
The setting is adopted immediately.
OPT.
RATIO
A+B+C
A : B
A : BIC
OPT.
RATIO
MODE
RATIO
A+B+C
A:B
A:BIC
EV
+1 1/3
RATIO
OFF
MASTER
ETTL
A 1
B 1
MASTER
ETTL