User Manual

160
k
10.1.7 Partial light output (MP) in M-mode
settings on the master flash unit
Set the mode to as described in 10.1.2.
• Press the  button and the menu
will appear.
• Use the buttons  to select .
• Press the
°  button and open the menu.
• Use the  buttons to set the desired exposure
value.
• Press the
°  button and confirm the selected
setting.
The setting is adopted automatically.
M
OPT.
P
10.1.8 Remote channel settings
There are four independent remote channels to use
so that multiple remote systems in the same room
do not interfere with one another. Master and Slave
flash units belonging to the same remote system
must be set to the same remote channel.
• Press the  button and the menu
will appear.
• Use the buttons  to select .
• Press the
°  button and open the menu.
• Use the  buttons to set the desired channel.
• Press the
°  button and confirm the selected
setting.
The setting will take effect immediately.
The channel setting, CH. 3 in the example, can be
checked by pressing button
°  .
OPT.
CHANNEL
OPT.
MODE
CHANNEL
ZOOM
CHANNEL
2
3
4
OPT.
P
RATIO
MIA:B:C
M
M
P 1/4
MASTER
P
P 1/4